Leica R4: verschil tussen versies
Nieuwe pagina aangemaakt met 'Selten habe ich so viele alternative Fakten zu diesen Kameras gehört. Die R4s und die R4s Mod.2 waren verbesserte bzw. weiterentwickelte R4. Die Mechanischen R Modelle waren die R6 und die R6.2. Zur "Baugleichheit" der Leica R4 und der Minolta XD7: Elektronik: R4: Leitz-Entwicklung, von Ferranti gefertigter ULA-Chip. Dieser Ferranti-Chip war auch der Grund für die Ausfälle der ersten Serie. Sucher: R4: 0,85fach, 92% XD7: 0,87fach, 94% Sucheranzeigen: R4…' |
Geen bewerkingssamenvatting |
||
| Regel 72: | Regel 72: | ||
Tipp: | Tipp: | ||
Statt lässig im Ledersessel Witzchen machen, vorher mal informieren... | Statt lässig im Ledersessel Witzchen machen, vorher mal informieren... | ||
--------------------------- | |||
I've rarely heard so many alternative facts about these cameras. The R4s and the R4s Mod.2 were improved or further developed R4s. The mechanical R models were the R6 and the R6.2. | |||
Regarding the "identity" of the Leica R4 and the Minolta XD7: | |||
Electronics: | |||
R4: Leitz development, ULA chip manufactured by Ferranti. This Ferranti chip | |||
was also the reason for the failures of the first series. | |||
Viewfinder: | |||
R4: 0.85x, 92% | |||
XD7: 0.87x, 94% | |||
Viewfinder Displays: | |||
R4: Operating mode and metering characteristics via LED in the viewfinder | |||
XD7: No operating mode display | |||
Mirror: | |||
R4: Semi-transparent mirror with separate auxiliary mirror for exposure metering | |||
XD7: Standard mirror | |||
Mirror Damping: | |||
R4: Leitz loop-type crank mechanism without stop | |||
XD7: Standard with pneumatic stop damping | |||
Focusing Screen: | |||
R4: Leitz screen, user-changeable | |||
XD7: Minolta micro-cam screen, user-changeable only | |||
Metering: | |||
R4: Integral and selective metering, 1 metering cell in the mirror box | |||
XD7: Integral metering, 2 metering cells to the left and right of the eyepiece | |||
Measurement Lock: | |||
R4: For selective metering, press the shutter button to the pressure point (Leitz patent) | |||
XD7: no metering lock | |||
Exposure control: | |||
R4: manual, aperture priority, shutter priority, program priority | |||
XD7: manual, aperture priority, shutter priority | |||
Self-timer: | |||
R4: electronic with LED sequence control | |||
XD7: mechanical | |||
Battery check: | |||
R4: button with LED display | |||
XD7: no battery check | |||
Motor: | |||
R4: Motor Drive (4 fps) or Winder (2 fps) | |||
XD7: winder only (2 fps) | |||
Remote release: | |||
R4: mechanical cable release on camera and electronic remote release with shutter feedback | |||
and power supply for interval timer on motor and winder | |||
XD7: mechanical cable release and electronic Remote shutter release on camera | |||
Body: | |||
R4: Die-cast magnesium | |||
XD7: Milled metal body | |||
Back: | |||
R4: Film cartridge window | |||
XD7: Memo holder | |||
The backs are not interchangeable; | |||
the Leica back is just under 1 cm higher and has a different | |||
shape. | |||
Conclusion: | |||
Practically identical. | |||
Tip: | |||
Instead of casually making jokes in your leather armchair, do some research first... | |||
Huidige versie van 17 aug 2025 om 05:57
Selten habe ich so viele alternative Fakten zu diesen Kameras gehört. Die R4s und die R4s Mod.2 waren verbesserte bzw. weiterentwickelte R4. Die Mechanischen R Modelle waren die R6 und die R6.2.
Zur "Baugleichheit" der Leica R4 und der Minolta XD7:
Elektronik: R4: Leitz-Entwicklung, von Ferranti gefertigter ULA-Chip. Dieser Ferranti-Chip war auch der Grund für die Ausfälle der ersten Serie.
Sucher: R4: 0,85fach, 92% XD7: 0,87fach, 94%
Sucheranzeigen: R4: Betriebsart und Messcharakteristik mittel LED im Sucher XD7: keine Anzeige der Betriebsart
Spiegel: R4: teildurchlässiger Spiegel mit separatem Hilfsspiegel für Belichtungsmessung XD7: Standardspiegel
Spiegeldämpfung: R4: Leitz-Kurbelschleifengetriebe ohne Anschlag XD7: Standard mit pneumatischer Anschlagdämpfung
Mattscheibe: R4: Leitz-Scheibe, selber wechselbar XD7: Minolta-Microwabenscheibe, nur von Kundendienst wechselbar
Messung: R4: Integral und Selektiv umschaltbar, 1 Messzelle im Spiegelkasten XD7: Integral, 2 Messzellen links und rechts vom Okular
Messwertspeicherung: R4: Bei Selektivmessung durch Druckpunktnahme des Auslösers (Leitz-Patent) XD7: kein Messwertspeicher
Belichtungssteuerung: R4: manuell, Zeitautomatik, Blendenautomatik, Programmautomatik XD7: manuell, Zeitautomatik, Blendenautomatik
Selbstauslöser: R4: elektronisch mit Ablaufkontrolle über LED XD7: mechanisch
Batteriekontrolle: R4: Taste mit LED-Anzeige XD7: keine Batteriekontrolle
Motor: R4: Motor Drive (4B/s) oder Winder (2B/s) XD7: ausschliesslich Winder (2B/s)
Fernauslöser: R4: mech. Drahtauslöser an Camera und elektr. Fernauslöser mit Rückmeldung der Auslösung und Stromversorgung für Intervalltimer an Motor und Winder XD7: mech. Drahtauslöser und elektr. Fernauslöser an Camera
Gehäuse: R4: Magnesium-Druckguss XD7: gefrästes Metallgehäuse
Rückwand: R4: Filmpatronensichtfenster XD7: Memohalter Die Rückwände sind auch nicht gegeneinander austauschbar, die Leica-Rückwand ist knapp 1cm höher und hat eine andere Form.
Fazit: Praktisch baugleich.
Tipp: Statt lässig im Ledersessel Witzchen machen, vorher mal informieren...
I've rarely heard so many alternative facts about these cameras. The R4s and the R4s Mod.2 were improved or further developed R4s. The mechanical R models were the R6 and the R6.2.
Regarding the "identity" of the Leica R4 and the Minolta XD7:
Electronics: R4: Leitz development, ULA chip manufactured by Ferranti. This Ferranti chip was also the reason for the failures of the first series.
Viewfinder: R4: 0.85x, 92% XD7: 0.87x, 94%
Viewfinder Displays: R4: Operating mode and metering characteristics via LED in the viewfinder XD7: No operating mode display
Mirror: R4: Semi-transparent mirror with separate auxiliary mirror for exposure metering XD7: Standard mirror
Mirror Damping: R4: Leitz loop-type crank mechanism without stop XD7: Standard with pneumatic stop damping
Focusing Screen: R4: Leitz screen, user-changeable XD7: Minolta micro-cam screen, user-changeable only
Metering: R4: Integral and selective metering, 1 metering cell in the mirror box XD7: Integral metering, 2 metering cells to the left and right of the eyepiece
Measurement Lock: R4: For selective metering, press the shutter button to the pressure point (Leitz patent) XD7: no metering lock
Exposure control: R4: manual, aperture priority, shutter priority, program priority XD7: manual, aperture priority, shutter priority
Self-timer: R4: electronic with LED sequence control XD7: mechanical
Battery check: R4: button with LED display XD7: no battery check
Motor: R4: Motor Drive (4 fps) or Winder (2 fps) XD7: winder only (2 fps)
Remote release: R4: mechanical cable release on camera and electronic remote release with shutter feedback and power supply for interval timer on motor and winder XD7: mechanical cable release and electronic Remote shutter release on camera
Body: R4: Die-cast magnesium XD7: Milled metal body
Back: R4: Film cartridge window XD7: Memo holder The backs are not interchangeable; the Leica back is just under 1 cm higher and has a different shape.
Conclusion: Practically identical.
Tip: Instead of casually making jokes in your leather armchair, do some research first...